Server and spider issue

7 replies [Last post]
4. March 2005 - 12:45
EVOL.IZNOGOUD
Iznogoud's picture
Offline
Joined: Mar 2004
Posts:

A helping hand, any tips & tricks would be appreciated...

When i run a Q3 E+ server it of some reason refuse to show on the Spider here.
This problems occured when i got myself a new modem/router/firewall (Zyxel Prestige 660-HW-61). In the settings there are no DMZ option.
I tried 'allow all ports' in the firewall-NAT table, allow all TCP/UDP traffic, respond to ping requests...

To connect by typing its public IP works!
But it would be great if ppl knew it exists too Happy

I know i've done something wrong, question is: what?

Bättre pissa i stuprännan än stupa i pissrännan !

Top
4. March 2005 - 15:33
#1
EVOL.IZNOGOUD
Iznogoud's picture
Offline
Joined: Mar 2004
Posts:
Server and spider issue

Quote:
I tried 'allow all ports' in the firewall-NAT table, allow all TCP/UDP traffic, respond to ping requests...

Think its the respond to ping thing that is malfunctioning!

Bättre pissa i stuprännan än stupa i pissrännan !

Top
4. March 2005 - 16:06
#2
[MR.]GibletGrinder
z-monster's picture
Offline
Joined: Aug 2004
Posts:
Server and spider issue

Does your E+ server show up on ASE?

I know your problem appears to be router related IZ, but I thought I would throw some additional E+ server info just in case. The following information is also for anyone else.

Check your server config and make sure you have set sv_master1 & so forth...

Here is my setup:
set sv_master1 "master0.gamespy.com"
set sv_master2 "master3.idsoftware.com"
set sv_master3 "master.kali.net"

For those who don't know what sv_master does, please read below:
sv_master is what reports your game server to a Q3 master server. By default sv_master1 is set to the id master. You can also specify sv_master2 as master0.gamespy.com and it will show up on their list as well. You can have as many sv_master as you want as long as there is a master server that it will report to.

I've noticied that my server [MR.]Clan ExcessivePlus FFA shows up twice on the spider. I don't know much about the spider, but I am sure master1 & master2 are the reason.

"Samo sloga Srbina spasava"

Top
4. March 2005 - 16:47
#3
EVOL.IZNOGOUD
Iznogoud's picture
Offline
Joined: Mar 2004
Posts:
Server and spider issue

Quote:
Here is my setup:
set sv_master1 "master0.gamespy.com"
set sv_master2 "master3.idsoftware.com"
set sv_master3 "master.kali.net"

Have tried this. Good tip! Usually works... Usually...
Even added the quake3arena masterserver just in case.

I'll see if i find some time tonight to give it another shot.

Server is up -> 81.225.165.248:27960
Has been for some hours now, but still doesn't show on spider.
PB on (pb_sv_guidrelax 7), Voting on (/callvote xp_rotation tdm.txt, ffa.txt, 1on1.txt, custom.txt -> /callvote nextmap)
Custom is FFA on a all non q3-standardmapsrotation... Ehum.. jupp...
Feel free to try it out.

Bättre pissa i stuprännan än stupa i pissrännan !

Top
4. March 2005 - 20:49
#4
[MR.]Stollo
Offline
Joined: Jul 2004
Posts:
Server and spider issue

try monster.idsoftware.com

Real men always attack from behind Winking

Top
4. March 2005 - 23:35
#5
EVOL.IZNOGOUD
Iznogoud's picture
Offline
Joined: Mar 2004
Posts:
Server and spider issue

Thx Stollo, i will add it asap ...

Bättre pissa i stuprännan än stupa i pissrännan !

Top
5. March 2005 - 2:31
#6
easy
Developer
easy's picture
Offline
Joined: Sep 2003
Posts:
Server and spider issue

Start the server and try
http://www.excessiveplus.net/?query&81.225.165.248:27960

If it wont show up then your port is not forwarded correctly.
Even if your sv_master's aren't correct sv_master5 is still hard set to master0.excessiveplus.net (our master server).

Top
6. March 2005 - 13:16
#7
EVOL.IZNOGOUD
Iznogoud's picture
Offline
Joined: Mar 2004
Posts:
Server and spider issue

Evreka!

I resetted the firewall back to factorysettings and started all over.
Only edited the PING rule, and poof, now it works Happy

Bättre pissa i stuprännan än stupa i pissrännan !

Top