Send Your Q3config Here!

149 replies [Last post]

1. March 2012 - 19:04

#101

Offline

Joined: Jul 2008

Posts:

Re: Send Your Q3config Here!

wrote:

wrote:
wrote:
wrote:
ch_crosshaircolor "wihte"

OSP and CPMA had ch_crosshairColor, was renamed in CPMA to cg_crosshairColor later on. For E+ you need to use xp_crosshairColor.

so i can delete all ch_xxx comands from my config?

I have all other mods settings in my cfg, not only E+.

and its load correctly? i think quake have limited kb for loading cfg ;] if you have too much then insde config you need next what load other variables example like mine
exec r_.cfg
exec cg_.cfg
exec wallhack.cfg
exec acc.cfg
exec cg.cfg etc etc

1. March 2012 - 19:14

#102

Offline

Joined: Aug 2006

Posts:

Netherlands

Re: Send Your Q3config Here!

wrote:

wrote:
wrote:
wrote:
wrote:
ch_crosshaircolor "wihte"

OSP and CPMA had ch_crosshairColor, was renamed in CPMA to cg_crosshairColor later on. For E+ you need to use xp_crosshairColor.

so i can delete all ch_xxx comands from my config?

I have all other mods settings in my cfg, not only E+.

and its load correctly? i think quake have limited kb for loading cfg ;] if you have too much then insde config you need next what load other variables example like mine
exec r_.cfg
exec cg_.cfg
exec wallhack.cfg
exec acc.cfg
exec cg.cfg etc etc

max is something like 17 kb

1. March 2012 - 19:31

#103

Offline

Joined: Feb 2010

Posts:

Re: Send Your Q3config Here!

wrote:

so i can delete all ch_xxx comands from my config?

You could If you're not playing these mods but their existence doesn't harm anyway. But make sure you doing a copy of your config first before editing it. Who knows, things could go wrong.

1. March 2012 - 19:57

#104

Offline

Joined: Jul 2005

Posts:

Re: Send Your Q3config Here!

thx for answering for the ch_cmds and max is 16kb ..

Yellow card for

Using ur brain, finding a solution, beside an excisting rule and have an agreement.

2. March 2012 - 1:13

#105

Clan/TS Moderator

Offline

Joined: Aug 2009

Posts:

Poland

Re: Send Your Q3config Here!

Can someone with extra-super-hiper-ultra-outstanding Q3 knowledge confirm that max size of the config is 16kb? I am almost sure I had 17kb!

"Of all the things I've lost, I miss my mind the most."
- Mark Twain

2. March 2012 - 2:27

#106

THE ONE AND ONLY

Offline

Joined: Dec 2006

Posts:

Re: Send Your Q3config Here!

The limit is actually defined by the MAX_CVARS constant at 1024 (commands). Which is around ~16kb.

So It the number of cvars/commands needs to be less or equal with 1024 when quake 3 starts .. if its more the quake3 will reset the config back to the default one. after q3 starts it can get to much more then 16kb. I've got to 19kb (i had alot of mods). When q3 writes his config it's not checking for this limit. So is able to save it like that. But not able to load it...

With exec the limit is the same 1024. if its more you'll get this message:

Quote: