Help me with selection Defrag maps

2 replies [Last post]
6. February 2026 - 18:52
JIVA
Jiva's picture
Offline
Joined: Jun 2006
Posts:
CZ Czech Republic

hallo
i have ioquake 3 server now at home . Sadly it is on arm platform not pc_x86_64 . So i am limited only on ioquake3-server vanilla without mods. My like , my want now, my reqest is for create defrag instance of my server.

I dont have arm version of Defrag Mod . ExcessivePlus is not usable too. Only ioquake3-server vanilla

my ask : Do you know some maps in Defrag style for normal quake 3 arena or for ioquake 3 vanilla ?

only few is enought if here exist minimal one

meaby coldrun ? it is possible to beat that map with ioquake3-server vanilla ?

assist me phlese who know ?

JIVA's Group = https://discord.com/invite/tDGvTTx

Top
7. February 2026 - 10:43
#1
rUnThEoN?!
Site administrator
Skullheadq3's picture
Offline
Joined: Dec 2005
Posts:
DE Germany
Re: Help me with selection Defrag maps

the basic problem you have is on the physic side.

try
set pmove_accurate "125"

to get more stable physics like defrag.

a major problem is that in quake3, without com_maxfps 125, sv_fps 125 and g_synchronousclients 1 you basically always hop 47 units high instead of supposed 48 making strafejumps highly volatile.

hurrenson: "This idiot is apparently not familiar with a rail/sniper style."

Top
7. February 2026 - 19:28
#2
JIVA
Jiva's picture
Offline
Joined: Jun 2006
Posts:
CZ Czech Republic
Re: Help me with selection Defrag maps

results :
on raspberry pi you can have ioquake3-server , but only vanilla

JIVA's Group = https://discord.com/invite/tDGvTTx

Top